Electric Water Heater Sounds Like Water Running Fix

It was a quiet evening when I first heard the sound of water running inside my house. After a brief search, I discovered the source: my electric water heater. If your electric water heater is making a sound like running water, it’s important to address it promptly. Here’s a comprehensive guide to help you diagnose and fix the issue.

Common Causes of a Running Water Sound in Electric Water Heaters

1. Sediment Buildup

Sediment buildup is a common issue that can cause various noises, including a sound like running water. Minerals in your water settle at the bottom of the tank over time, leading to these noises.

How to Fix:

  • Drain and Flush the Tank:
    1. Turn Off the Power: Shut off the electricity to the water heater at the circuit breaker.
    2. Cool Down: Let the water heater cool down for about an hour to avoid burns.
    3. Attach a Hose: Connect a garden hose to the drain valve at the bottom of the tank and run the other end to a safe drainage location.
    4. Open the Valve: Open the drain valve and allow the water to drain out completely.
    5. Flush the Tank: Once drained, open the cold water supply to flush out the remaining sediment. Repeat until the water runs clear.
    6. Close the Valve and Refill: Close the drain valve, disconnect the hose, and turn on the water supply to refill the tank.
    7. Restore Power: Turn the power back on at the circuit breaker.

2. Air in the System

Air trapped in the water lines can create noises that sound like running water. This can happen after maintenance or if there’s a leak allowing air to enter the system.

How to Fix:

  • Bleed the Air from the System:
    1. Turn Off the Power: Shut off the electricity to the water heater.
    2. Open Faucets: Open all hot water faucets in your home to allow trapped air to escape.
    3. Run Water: Let the water run until the sound of running water subsides and only water is flowing steadily.
    4. Close Faucets: Close the faucets once the air has been purged from the system.
    5. Restore Power: Turn the power back on at the circuit breaker.

3. Loose Heating Elements

Loose heating elements can vibrate during operation, causing a sound like running water.

How to Fix:

  • Tighten the Heating Elements:
    1. Turn Off the Power: Shut off the electricity to the water heater at the circuit breaker.
    2. Access the Elements: Remove the access panels on the water heater to expose the heating elements.
    3. Tighten the Elements: Use a wrench to tighten the heating elements snugly, but be careful not to over-tighten.
    4. Replace Panels and Restore Power: Replace the access panels and turn the power back on.

Preventing Future Issues

  • Regular Maintenance: Drain and flush your water heater at least once a year to prevent sediment buildup.
  • Check for Air Leaks: Periodically check for leaks in your water lines that could allow air to enter the system.
  • Inspect Heating Elements: Regularly inspect and tighten heating elements to ensure they are secure.

Conclusion

When your electric water heater sounds like running water, it’s usually due to sediment buildup, air in the system, or loose heating elements. By identifying the cause and taking appropriate action, you can silence the noise and ensure your water heater operates efficiently. Regular maintenance is key to preventing these issues and keeping your water heater in top condition. So, the next time you hear that running water sound, you’ll know exactly what to do!

Share the Fun!

Leave a Comment